Tubewinder Belts

Craig ContofalskyJanet David



   Today's Technology Coupled with 40 Years Experience.
     
Commercial Electric Products Corporation has over 40 years experience in producing Tube winder belts. We utilize the latest technology in compounding rubber stock and producing high tensile cords. This technology combined with our experience in designing, producing and testing, assures you of a quality belt designed specifically for tube winding.
 
Our newest brand - "Superlative" tube winder belts are designed, developed and "test proven" for operating around pulleys and mandrels in the production of paper tubing. (they are not a compromise adapted from power transmission or high speed grinder belts). Superlative belts are endless, smooth surface, accurate length and with made to wrap very tightly around mandrels to produce high quality paper tubes
 
The heart of Superlative belts is an endless high tensile cord section. The cover is a specially compounded rubber stock with high coefficient of friction throughout its thickness. It pulls uniformly from brand new until it's worn down to cord center, but that's not all, you can use both sides for maximum life and service! The cover is non marking and non toxic and has excellent resistance to the absorption of water soluble glue. In addition, it will handle all grades of paper from the softest to the highest quality Gloss Kraft type.

   Features and Benefits
     
  • Long Life
  • Endless
  • Smooth Surface
  • Accurate Dimensions
  • Stable
  • Non Marking
  • Non Toxic
  • Fast Clean-up and Return to Service
  • Guarantee

   Three Constructions to suite your needs
     
Light Construction
(LC-3/32" thick)

Can handle one to twelve plies of paper depending on paperweight. Can be supplied from 36" to 145" endless. Mandrel sizes from 1/4" diameter to 4" diameter preferably.
 
Heavy Construction
(HC-1/4" thick)

Can be supplied to widths, preferably starting from 2" wide and up. Can handle from 2-3 plies up to 6-8 plies of paper depending on paperweight. Can be supplied from 56" up to 167" endless. Mandrel sizes from 3" diameter, preferably and up
 
Extra Heavy Construction
(XHC-3/8" thick)

Can be supplied in widths 2" and up. Can handle 2-3 plies of paper minimum and up to 8-10 plies of paper depending on paper thickness and weight. Will be very good where liners of various materials are first spiraled around mandrels and then plies of paper stock used to finish the tube. can be supplied, preferably from 84" up to 167" endless. Mandrel sizes from 4" diameter and up

   Top Quality Tubes in Less time at Lower Cost
     
It's no secret... It's been proven time and time again in virtually every manufacturing process, "using a quality tool, designed specifically for the job, means ease of operation, minimum down time and longer tool life" and anyone involved in manufacturing knows that translates into more and better production at a lower cost
 
Note: Full sleeves available for your slitting

   Pricing and Delivery
     
Our pricing is F.O.B Cleveland, Ohio. Delivery is one week on stock items. Our terms are due on or before 30 days, Net 30.

   Guarantee
     
We guarantee our products to be free from defects in material and workmanship

   Standard Tubewinder Sleeves
     
   LC   HC   XHC     XHC   HC   LC   
36" x  

 

(LC) Light Construction
3/32" Thick
Mandrels, 1/4" thru 1"

(HC) Heavy Construction
1/4" Thick
Mandrels, 3" and up

(XHC) Extra Heavy Construction
3/8" Thick
Mandrels, 4" and up

x x x 105"
43.5" x x 108"
44.5" x x x 109"
50" x x 110"
54" x x x 112"
56" x x x x 114"
58" x x 115"
60" x x 116"
68" x x x 118"
72" x x x x 120"
74" x x 122"
76" x x x 125"
78" x x x x 127"
80" x x 128"
82" x x x 130"
84" x x x

x

x 132"
86" x x 134"
89" x x 135"
90" x x x 136"
92" x x x x x 138"
93" x x x x 145"
94" x x x x 167"
96" x x
100" x x x
104" x

   Tubewinder Belt Installation and Set Up Instructions
     
  • Start belt tension VERY SLACK.  Belt covers have very high coefficient of friction and when new, can grab.
     
  • Tension belt which easily wraps around mandrel until it takes hold of paper.  Let this setting remain for 2-3 weeks.
     
  • Thereafter tension belt slightly to meet your production needs.
     
  • We cannot be responsible for belt breakage due to grabbing mandrel through over tensioning and lack of following above instructions.